Industry knowledge
How to choose an industrial fully automatic popcorn machine that suits you?
Choosing an industrial fully automatic popcorn machine that suits you needs to consider the following aspects:
1. Production demand:
Production requirements:If your production scale is large， such as supplying popcorn to large supermarkets， cinemas and other places， you need to choose a machine with high output. Some large commercial popcorn machines can produce hundreds of kilograms per hour， while small ones may only produce dozens of kilograms per hour. Determine the appropriate output level based on your expected sales and production efficiency.
Production frequency: If you need to produce popcorn frequently， the continuous working ability and stability of the machine are very important. Choosing machines that can run stably for a long time and are not prone to failure can reduce production interruptions caused by equipment maintenance.
2. Heating method:
Gas heating:
The advantage of this heating method is that it heats quickly and can make the corn reach the popping temperature in a short time， thereby improving production efficiency. Moreover， the gas cost is relatively low， which is suitable for large-scale production. However， gas heating requires a stable gas supply， and safety should be paid attention to during use， and the workshop needs to have good ventilation conditions.
Electromagnetic heating:
The advantages of electromagnetic heating are uniform heating and precise temperature control， which can better ensure the quality of popcorn. At the same time， electromagnetic heating is relatively clean and environmentally friendly， without open flames and exhaust emissions. However， the equipment cost of electromagnetic heating is relatively high， and the power supply requirements are also relatively high.
3. Pot material and structure:
Pot material: Common pot materials include stainless steel and cast iron. Stainless steel has the advantages of corrosion resistance， easy cleaning， and long service life， making it an ideal choice. Cast iron has good thermal conductivity， but is relatively easy to rust and requires better maintenance6.
Pot structure: The structural design of the pot will affect the uniformity of heating and the frying effect of popcorn. For example， a pot with a planetary stirring structure can make the corn roll fully in the pot and heat more evenly， thereby improving the quality and ball rate of popcorn.
4. Degree of automation:
Fully automatic control: The fully automatic popcorn machine can realize the whole process of automatic operation from feeding， heating， stirring to discharging， which greatly saves labor costs and improves production efficiency. When choosing， make sure that the control system of the machine is stable and reliable， and the operation interface is simple and easy to understand.
Intelligent functions: Some high-end popcorn machines also have intelligent functions， such as automatic temperature adjustment， automatic fault alarm， etc. These functions can further improve the convenience and safety of production. If conditions permit， you can give priority to machines with intelligent functions
5. Safety performance:
Pressure protection:
The popcorn machine will generate a certain amount of pressure during operation， so it is necessary to have a good pressure protection device， such as a safety valve， pressure sensor， etc.， to prevent safety accidents caused by excessive pressure.
Overheating protection:
If the heating system fails， it may cause the temperature to be too high， so the machine needs to have an overheating protection function， which can automatically cut off the power supply when the temperature exceeds the set value to protect the safety of equipment and personnel.
Electrical safety:
Check whether the electrical part of the machine meets the relevant safety standards， whether the wires have good insulation protection， and whether the grounding is reliable.
6. Brand and after-sales:
Brand reputation: Choose a well-known brand of popcorn machine， the quality and after-sales service are more guaranteed. You can learn about the reputation and product quality of different brands through the Internet， industry exhibitions and other channels.
After-sales service: Good after-sales service is very important for industrial equipment. Before purchasing， you should understand the brand's after-sales service system， including the response speed of after-sales maintenance， the technical level of the maintenance personnel， whether spare parts are available， etc.
